Autoglym Polar Wash (2.5 Litres)

Deep Clean Via Foam Lance After Pre-Washing

The high-foaming cleaner that tackles dirt, traffic film, and grime through pressure washer application. Autoglym Polar Wash creates a blanket of foam that lifts contamination safely from surfaces, designed for use after Polar Blast pre-wash stage. Protecting paintwork from wash-induced swirls by minimising mitt contact, this thick foam can be agitated for thorough cleaning or used standalone for lightly soiled vehicles.

Why Our Customers Love the Autoglym Polar Wash

✅ High-foaming formula covers vehicle in dirt-lifting foam when applied via foam lance.
✅ Protects paintwork from wash-induced swirls and scratches through contactless or minimal agitation.
✅ Works effectively after Polar Blast pre-wash for thorough two-stage cleaning.
✅ Suitable for lightly soiled vehicles as standalone cleaner without pre-wash.

What Makes It Special?

This is the cleaning stage of the Polar system, delivering deep cleaning through foam chemistry rather than aggressive scrubbing that risks paint damage.

• Thick foam dwell time allows active ingredients to break down traffic film and grime.
• Can be agitated with Polar Mitt for thorough cleaning or left contactless for light soiling.
• 250ml mixed solution covers average car, making 2.5L bottle economical.
• Safe on all exterior surfaces including glass and wheels.
• Ideal for Polar system users, foam lance washing, or anyone wanting minimal-contact cleaning.

Specifications

• Size: 2.5 Litres.
• Formulation: High-foaming pressure washer cleaner.
• Dilution: 100ml Polar Wash to 500ml water (adjust for desired foam density).
• Maximum Strength: 50:50 dilution not recommended stronger.
• Dwell Time: Up to 10 minutes (do not allow to dry).
• Not Suitable For: Soft top convertibles.
• Best Paired With: Polar Blast (pre-wash), Polar Seal (protection), Polar Mitt, Polar Blaster.

"Polar Wash alone works fine without Blast first. The 10-minute dwell is maximum not minimum, work faster on warm days. Agitating with Polar Mitt gives deepest clean but contactless foam alone handles light soiling. Follow with Polar Seal for complete Polar system protection. Don't go stronger than 50:50 dilution, you'll waste product without better cleaning."

How To Use
1. Check vehicle panels and wheels are cool to touch, out of direct sunlight.
2. Pre-wash with Polar Blast recommended, or rinse with water to loosen contamination.
3. Dilute (try 100ml Polar Wash to 500ml water initially), adjust foam gun settings.
4. Apply working from bottom to top, ensuring all surfaces covered including glass and wheels.
5. Allow up to 10 minutes dwell time (do not allow to dry).
6. For thorough clean, agitate with sponge or Polar Mitt before rinsing.
7. Rinse thoroughly from bottom to top and dry.

Important Notes
⚠️ Do not allow foam to dry on vehicle surfaces.
⚠️ Not suitable for soft top convertibles.
⚠️ Do not exceed 50:50 maximum dilution strength.

*this product may be excluded from certain discounts.
Account Discount
Code Discount