Autoglym Polar Blast Snow Foam (2.5 Litres)

Thick Snow Foam That Prevents Wash Swirls

The high-foaming pre-cleaner that lifts dirt before your wash mitt touches paintwork. Autoglym Polar Blast creates a rich blanket of foam that clings to surfaces, gently loosening contamination and allowing it to be rinsed away before the contact wash stage. pH-neutral and safe for existing wax and sealant protection, this snow foam significantly reduces the risk of wash-induced swirls and scratches by removing the grit particles that cause them.

Why Our Customers Love the Autoglym Polar Blast

✅ High-foaming pre-cleaner removes surface dirt and grit before wash mitt contact, preventing swirls.
✅ Thick foam clings to vertical surfaces, maximising dwell time for effective contamination loosening.
✅ pH-neutral formulation won't strip existing wax or sealant protection.
✅ Can be used instead of shampoo stage for lightly soiled vehicles, simplifying wash process.

What Makes It Special?

This is the snow foam for people serious about preventing wash-induced paintwork damage. The clinging foam actually lifts contamination rather than just looking impressive.

• Removes the larger dirt particles that get trapped in wash mitts and cause scratching.
• Thick lather provides generous dwell time without running off immediately.
• Works with foam lance and pressure washer or foam gun with regular hose.
• Safe weekly use won't degrade protective coatings like some aggressive pre-wash products.
• Ideal for preventing swirl marks, pre-washing heavily soiled vehicles, or enthusiasts prioritising paint condition.

Specifications

• Size: 2.5 Litres.
• Formulation: pH-neutral high-foaming pre-wash cleaner.
• Dilution: 100ml product to 500ml water (adjust for desired foam thickness).
• Dwell Time: Up to 10 minutes (do not allow to dry).
• Safe For: All paintwork, glass, wheels, wax and sealant protection.
• Best Paired With: Polar Blaster foam lance, Polar Wash, two-bucket wash method.

"Start with the 100ml to 500ml dilution and adjust from there, more product doesn't necessarily mean better cleaning. Apply from bottom to top so the foam has maximum contact time on lower panels where dirt is heaviest. Watch the foam, if it's sliding off immediately your dilution is too weak, if it's barely foaming you've got too much product. Rinse your foam lance thoroughly after use to prevent clogging."

How To Use
1. Check vehicle panels and wheels are cool to touch and out of direct sunlight.
2. Select dilution ratio (try 100ml Polar Blast to 500ml water initially).
3. Adjust foam lance/gun settings to increase or reduce foam as desired.
4. Apply Polar Blast working from bottom to top, ensuring all surfaces covered.
5. Allow up to 10 minutes for foam to dwell and loosen dirt (do not allow to dry).
6. Rinse thoroughly working from bottom to top.

Important Notes
⚠️ Do not allow foam to dry on vehicle surfaces.
⚠️ Ensure surfaces are cool before application, avoid direct sunlight.

*this product may be excluded from certain discounts.
Account Discount
Code Discount