UF Snow Foam Cannon + UF Snow Foam (5L) (Various Adapters)

High-Pressure, Multi-function Foam Cannon

The UF Snow Foam Lance delivers super-thick foam in a 90-degree wide flat fan to 0-degree jet patterns when attached to a pressure washer. The Snow Foam Lance provides clean water for rinsing purposes by twisting the soap control knob counterclockwise to its extreme position. Then, to provide a rich foam output, the soap control knob can be turned clockwise to its extreme position, perfect for use on cars, motorcycles and boats.

The core components of the UF Foam Cannon are made from high-quality brass, with the bottle itself wearing the UF emblem on a high-quality hope plastic that is both thick and durable. The newly-designed big mouth plastic cap enables the easy screw on/off of the bottle and means the filling process is much easier with less chance of product spillage.

Get the complete kit with an additional Ultimate Snow Foam 5 Litres to get you going and a little saving.

How Do You Use A Snow Foam Cannon?

• Mix 100ml snow foam and 900ml water into the 1 litre cannon bottle. 200ml if the car is particularly dirty or use neat to get a thick snow foam.
• Twist nozzle for desired spray pattern.
• Spray all over your vehicle covering the paintwork, glass and wheels.
• Allow the snow foam to dwell for 3-5 minutes before rinsing away with your pressure washer.
• Do not allow the product to dry.

Features & Benefits:

• High-pressure foam cannon for use in conjunction with a pressure washer
• Apply snow foams, shampoos etc
• Control knob to set chemical mixture rate
• Spray nozzle twist for desired spray pattern
• Toggle feature for turning solution off & rinsing
• Big mouth cap for easy filling
• Sturdy & comfortable skeleton type nozzle
• 1 Litre capacity

Technical Specification:

• Bottle capacity: 1L
• Material: Brass, Nylon (plastic) + Stainless Steel Connector
• Minimum pressure: 1000PSI
• Maximum pressure: 3000PSI
• Minimum flow: 6.3 Litres Per Minute
• Maximum flow: 24 Litres Per Minute
• Maximum temperature: 140°F

Directions for use:

• Attach the clear pick-up tube to the brass nipple connector which can be found on the bottom of the big black plastic cap
• Fill the bottle with water and add concentrated UF Ultimate snow Foam according to your preferred ratio
• Carefully attach the bottle to the big plastic cap and securely tighten
• Shake the cannon gently to let soap and water mix adequately
• Attach to the pressure washer wand
• Adjust the top dial of the foam cannon for desired mix ratio
• Twist the spray mode nozzle of the foam cannon to adjust the spray nozzle for your desired spray pattern
• Please note: Following a complete wash, insure you flush the cannon with clean water to prevent any residue build-up

Variant: Please select appropriate pressure washer model from drop down menu above