Rupes BigFoot HLR15 Dual Action Cordless Polishers (STD or BAS Kit)

Cordless 150mm Polisher with 15mm Throw for Ultimate Versatility

The Rupes BigFoot HLR15 is a professional cordless polisher featuring a 15mm orbit and 150mm backing plate powered by advanced 18V iBrid technology. Delivering 30-40 minutes of continuous operation with speeds from 3,000-5,000 OPM, this 1.75kg machine combines the versatility of the popular 15mm throw with complete cordless freedom. Built with new anti-spinning ring technology, advanced gears, and an in-runner brushless motor for maximum efficiency.

Why Our Customers Love the HLR15 Polisher

✅ Cordless 15mm orbit delivers versatile correction without cable restrictions.
✅ 18V battery provides 30-40 minutes continuous operation at full power.
✅ Weighs only 1.75kg (without battery) versus 2.6kg for corded equivalent.
✅ New gear technology and anti-spinning ring reduce vibration significantly.
✅ Dual battery charger ensures one battery always ready.

What Makes It Special?

The HLR15 brings the sweet-spot 15mm orbit to cordless operation. This is the most versatile throw size, handling everything from bonnets to doors to curved panels with confidence. The weight reduction compared to corded machines (1.75kg vs 2.6kg) makes a real difference during extended sessions.

• 150mm (6") backing plate with 15mm orbit.
• 30-40 minutes battery life at full power.
• Fast 50-55 minute charge time with dual charger.
• Speed range: 3,000-5,000 OPM.
• New anti-spinning ring prevents pad stress.
• Advanced gear technology reduces noise and vibration.
• LED battery indicator with charge and overload warnings.
• Weighs 1.75kg (without battery) for reduced fatigue.
• New eccentric set improves efficiency.

Specifications

• Backing Plate: 125-150mm (5"-6").
• Orbit: 15mm.
• Power: 18V DC lithium-ion cordless.
• Speed Range: 3,000-5,000 OPM.
• Battery Life: 30-40 minutes continuous at full power.
• Charging Time: 50-55 minutes.
• Weight: 1.75kg (without battery).
• Thread: M8.
• Motor: In-runner brushless 350W max output.

• Features: LED indicator, overcurrent protection, electronic switch, anti-spinning ring.

• STD Kit Includes:

  • HLR21 Polisher
  • 2x Batteries (9HB185LT)
  • 1x Dual Charger (9HC185LT)
  • 1x Backing plate.

• BAS Kit Includes:

  • HLR21 Polisher
  • 2x Batteries (9HB185LT)
  • 1x Dual Charger (9HC185LT)
  • 1x Backing plate.
  • 1x DA Fine Compound (9.DAFINE250)
  • 1x DA Coarse Compound (9.DACOARSE250)
  • 2x DA Intermediate Foam Pad (9.DA150B)
  • 2x DA Fine Foam Pad (9.DA150M)
  • 2x DA Coarse Wool Pad (9.NW130H)
  • 2x DA Fine Wool Pad (9.NW130M)

How To Use
1. Fully charge both batteries before starting work.
2. Select pad size appropriate for panel (140-165mm range).
3. Check LED indicator for battery charge level.
4. Set speed dial based on correction requirements.
5. Work panels with cordless freedom and reduced weight.
6. Allow anti-spinning ring to prevent pad stress between sections.
7. Monitor LED for low battery warning and swap proactively.
8. Keep second battery charging while using first.

Important Notes
⚠️ Performance decreases below 20% battery swap before this point.
⚠️ Always maintain charged spare battery for uninterrupted work.
⚠️ Lighter than corded machines but same correction capability.
⚠️ LED rapid blink indicates overload reduce pressure immediately.