Kamikaze Collection Miyabi Coat 2.0 (30ml)

Brilliant Shine & Long-Lasting Protection.

In the Japanese language, the word "Miyabe" represents an aesthetic ideal of elegance and refinement, and this ceramic coating certainly provides that!

Kamikaze Collection Miyabi Coat 2.0 is fantastic for both professionals and enthusiast with its easy application and hard durability. Use it as a stand along sealant or as a strong base layer for a top coat sealant with higher beading properties; either way the high candy gloss finish is something to be desired.

Miyabi 2.0 contains smaller molecules than the average glass coat sealant, making it less prone to water spotting that we are used to. Kamikaze Collection have now introduce Carbon Nanotube Technology into Miyabi Coat 2.0, strengthening the bond of the coating to the surface and increasing the antifouling properties of the top surface. Tie in the high silica dioxide content providing durable protection and an amazingly clear, brilliant shine to any colour paintwork.

Features & Benefits:

• Easy to apply, easy to buff
• Provides brilliant shine
• Repels water, dirt & grime
• Non-solvent based & free from Volatile Organic Compounds (VOCs)
• Durable - lasts up to two years

How to use:

• Wash & dry the vehicle
• Polish to remove any paintwork blemishes prior to sealing
• Use a panel wipe to remove any polish/cleaning residues
• Shake the bottle well.
• Apply a few drops of Miyabi Coat to a cotton applicator pad
• Using a horizontal motion, cover a panel with Miyabi Coat 2.0 before going over the same area using a vertical motion. This will ensure even & uniform criss-cross coverage (do not apply more product between motions).
• Allow to cure for 3-5 minutes (depending on the ambient air temperature),
• Use a 1 soft clean microfibre buff the residue lightly
• Using a 2nd soft clean microfibre, rebuff to produce a high, candy-gloss shine
• Ensure that you get ALL residue are off the surface. Pressure is not needed during this process.
• Once complete inspect the vehicle again to make sure there are no dark spots remaining.
• Allow 24 hours before getting wet

Important

• Do not apply in direct sunlight
• Do not apply in temperatures below about 10 degrees C.
• If left too long and coating has become sticky, apply more and remove immediately.
• If you can leave the coating longer than 24 hours before getting wet the better
• Do not wash the car for 1 week after application
• Optimum application conditions: 15-25 °C, Humidity 40-70%
• If you wish to apply 2 coats, wait 1 hour in between coats.
• Infared (IR) curing? set lamps at 70-75 °C for 10-15 minutes per panel
• Maintain using Over Coat for additional gloss & hydrophobicity
• Once delivered store in a cool dry place and use within 6 months
• Once opened use within a month

Technical Specification:

• VOC-free
• Non-solvent based
• 96% Sio2
• Durability: 18-24 months
• Water contact angle: 95 degrees
• pH tolerance: 2-11
• Thickness layer: 1-2 microns
• Hardness: 8-9H (pencil scale)
• Coverage: 30ml = 2-3 cars

Size: 30ml

Material Safety Data Sheet (MSDS)