Upgrade Your Foam Sprayer with a Pro 2
Pre Wash is an essential part of any car cleaning routine and Snow Foam normally sits at the top of the tree of most used pre wash types. The issue is to generate a thick enough foam to stick to the car, you normally need to have a pressure washer and a foaming lance. Not with the IK Foam Pro 2, just add the product to the bottle (follow the bottle's dilution ratios), pump it up and you have snow foam.
The IK Foam Pro 2 is a small upgrade form the original Foam 1.5 but with a large overall improvement. The standard features found on both include, a manual pump up handle, a wide filling mouth and a safety value set to 3 bar, so you can't over pressurise and break the seals. The translucent tank for checking quantity of liquid. Where the Pro 2 is such an upgrade is in the finer details.
- A none wobble base to reduce the chance of knocking it over in use.
- Measurements up the side for accurate dilutions.
- Grip features on the bottle so no more slipping bottle.
- Additional caps for identifying products.
- Large capacity for longer run time and more product.
- Safety lock on the handle.
This fantastic solution especially for the quick weekend wash allows you to remove the light dust or dirt without unpacking all your car wash equipment. Spray the foam on the car and just rinse off with a hose, this small quick wash could stop the build up of traffic film between major washes and because there is no direct contact, no swirls!
IK Foam Pro 2 provides the user with a dense and permanent foam ideal for professional cleaning, sanitation and disinfection, HVAC system cleaning, vehicle washing and detailing, as well as for the disinfection of food processing areas and industrial kitchens.
Finally, the IK Foam Pro 2 Pump Up Foamer has 3 types of mixers:
- Orange - Wet Foam
- Grey - Intermediate Foam
- Green - Dry Foam
This gives you even more control over the type of foam required for the different parts of your car. A dryer foam may be more suitable to interiors or engine bays where you don't require as much water or a wet foam for areas where you need the foam to seep into every crevice.
Also, available as a Pro 2+ Model with compressor value here
Features:
- Valve - 3-bar setting with automatic pressure release option
- Nozzles - Special nozzle with fan-type foam
- Useful capacity - 1.25L
- Total capacity - 1.95L
- Gross weight - 0.7 kg
- Net weight - 0.56 kg
Documents
IK Sprayer Chemical Table
IK Sprayer Instruction Booklet
IK Sprayer Catalogue
*this product may be excluded from certain discounts.
Loyalty Discount
Trade Discount
Code Discount